ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Working With Masks
Modifying Masks
http://www.image2output.com
Deleting Paths of Vector Masks
Click
and make sure all paths you do not want to delete are inactive.
Then click , select EDIT | DELETE, or press the BACKSPACE (Mac OS)
or DELETE (Windows) key.
To delete all inactive paths in one go, select DELETE UNUSED in the MENU
window.
Note:
Saving Masks
Modifications made to masks are saved automatically in the following
cases:
• when you place a new or modified cut-out on a layout using the
COMPOSE | FOREGROUND or MIXGROUND function, even if you cancel
this operation (see also page 11-9).
• When you use a new or modified mask for restricting an image
manipulation to the masked area, e.g. in the IMAGE | RETOUCH
function (see also page 22-13).
• When you leave the MASKS | PIXEL function by clicking or pressing
RETURN/ENTER.
Masks that have not yet been used on any layout are overwritten without
any warning.
Modified Photoshop masks are automatically stored as new vector
masks in the ORIS mask files. Select SAVE IN IMAGE FILE in the MASK
ADMINISTRATION dialog to be able to use this mask in Photoshop. The
mask is copied to the image file as soon as you save the image.
Pixel masks can also be saved explicitly, e.g. if you do not want to use
them immediately. Use the following functions in the MENU window:
• STORE(NEW) saves the modified mask as a new mask
• STORE MASK overwrites the original mask or, if the mask has already
been used on a layout, saves it as a new mask.
You are always prompted to save an unsaved mask, no matter of which
type, when you are about to lose it.
22-8 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com