ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Exporting Layouts
‘Data Format’ Tab (PS, EPS, Flat PS, Flat EPS)
All except
(not-flat) PS,
PDF, EPS
Page EPS
When processing documents with Page EPS files (see page 33-4), you
can only output the original (high-res) EPS data if the output format is
PostScript, EPS or PDF. Use these options to specify what to do if a
different output format is used:
• Cancel processing (no output)
• Use the (low-res) EPS preview (if any)
‘Data Format’ Tab (PS, EPS, Flat PS, Flat EPS)
Fig. 3-8
‘Data Format’ Tab (‘Export Layout’ Dialog)
Linework
Use this parameter to select the output format for the following elements:
• Linework and 1-bit images
• Pixel masks created with ORIS PDF Tuner
• Text, tints and other high-resolution elements (only when converting
to flat output formats)
Choose between the following linework formats:
• BITMAP – CCITT Group 4 compressed bitmap format.
• TILES – Linework is split up into many small rectangles.
• RUNLENGTH – Run-length encoded (compressed) bitmap format.
• PATH – A filled path is created for every coherent color area.
The linework format may have an impact on the time required for the
data conversion in the ORIS program (slowest with PATH), the size of the
output document (depends on file contents) and the time required for
data output (depends on resolution).
Which linework format is best to use depends on many factors. Usually
BITMAP provides the best results. We strongly recommend this format
ORIS PDF Tuner Version 4.4.8 User Manual 3-15
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com