ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Creating and Opening Pages
‘Layout Parameters’ Dialog
http://www.image2output.com
Origin point
All objects can be precisely positioned on the layout by specifying a coordinate
(X and Y value). By default, the lower left layout corner has the
coordinate 0/0 and is therefore the origin point of the coordinate system.
However, you can set the origin point anywhere you like.
Enter the coordinate into the ORIGIN POINT X and Y boxes. Type the unit
of measurement into the same input boxes or select it using the lists.
Note that selecting from these lists changes also the units of the FORMAT
and BLEED parameters. The unit that will be applied is always that in the
input box, even if the list displays a different unit.
Changing the origin point will shift all layers. For example, if you change
it from 0/0 to +20/+20, the layers move to the right and upwards, if you
change it to –20/–20, they move to the left and downwards.
Having changed the origin point, close the dialog and select VIEW | COM-
PLETE PAGE ( +0 or CTRL+0). This reloads the layout and displays it in
a way that it fills the entire window.
Note:
Using the FILE | SYSTEM SETUP | LAYOUT REPRESENTATION command you
can also set the origin point to the upper left corner (see also page 31-6).
Bleed
Use this parameter to define bleed margins for the current layout. Enter
the size of the LEFT, RIGHT, TOP and BOTTOM margin into the respective
input boxes. Enter the unit of measurement into the input boxes or select
it from the lists to the right of the ORIGIN POINT parameter. Note that selecting
from these lists changes also the units of the FORMAT parameter.
Note:
The bleed margins must be added to the page format. For example, to
create an A4-sized (210 x 297 mm) layout with a 3 mm margin at the top,
bottom, left and right, you must set the page format to 216 x 303 mm.
When converting layouts to PDF or PostScript format, you can create
crop marks which indicate the actual page size (without bleed margins).
Use the PAGE MARKS tab on the EXPORT LAYOUT dialog. For more details
refer to Exporting Layouts (page 3-1).
5-8 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com