ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Exporting Layouts
‘Data Format’ Tab (PS, EPS, Flat PS, Flat EPS)
This affects linework if created in PATH format (see page 3-15), pixel
masks converted to paths and cut-outs positioned in ORIS PDF Tuner.
Note:
You should use this parameter only for the purpose indicated, otherwise
you may incur unwanted data loss.
Flat EPS/PS
only
Note:
Flat PDF/PS/
EPS only
Compression
Use this parameter to compress the CT portion of the Flat PS/EPS document,
thus reducing file size. You can choose between the compression
methods LZW (lossless) and JPEG (lossy).
When creating composite Flat PostScript documents with spot colors
and LZW compression you should select PostScript LEVEL 2, if you plan
to output the documents on Harlequin RIP. Harlequin RIP seems to be
unable to process the PostScript Level 3 LZW compression used for
spot color separations, even if the RIP is set up for PostScript Level 3.
Create white tints underneath K100 linework...
This option should usually be left disabled.
Some RIPs erroneously set solid black linework elements to overprint,
although this has not been defined in the document. If this option is enabled,
a white tint will be created under every K100 linework area. This
makes sure these elements will not overprint.
Creating white tints may considerably prolong RIP processing times,
depending on the number and arrangement of K100 tints on a page.
3-18 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com