ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Using Images
Image Display and Measure Functions
http://www.image2output.com
to one of them, the other windows no longer reflect the image stored on
disk. This situation is indicated in the title bar of such image windows.
You can save the contents of these windows as new images.
The following appears in the title bar:
• ORIGINAL OF ( is file name of original image)
This indicates that the image is loaded completely (all pixels) and has
not been changed. When you select FILE | SAVE, the image is saved
in the same directory and under the name shown in the title bar.
• (UNNAMED)
This appears if the image was loaded in low resolution or as a highres
section. When selecting FILE | SAVE you have to choose the name
and location of the new image file.
Directly Opening Images Used on Layout
When editing a layout you can directly load any image positioned there
without having to select it from the corresponding directory or image
overview:
1. Activate the image layer on the layout (see page 16-1).
2. Select LOAD IMAGE in the MENU window.
The image is loaded into a window. If it is a cut-out, the mask used
for positioning it is also loaded.
3. If ICC Color Management is enabled (see page 30-1), the MODIFY
ICC PROFILE dialog may appear and you have to select an ICC profile.
Image Display and Measure Functions
Rotating
Images (except linework) can be rotated clockwise by 90°, 180° or 270°.
To do so, repeatedly select FLIP on the MENU window or VIEW pull-down
menu. This affects only the on-screen display, not the image data itself.
The image automatically rotates back into its previous position when you
save it. To prevent this, select FIX ROTATION in the Menu window before
saving the image.
The FLIP function enables you to get a right-reading representation of
images which were not scanned in lying orientation. This allows more
convenient cut-out mask creation and image manipulation.
Zooming See page 30-12
Panning See page 30-16
20-10 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com