ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Inserting Images Into Layout
Different Ways of Positioning Images
Fig. 11-4
Modifying a ‘Mixground’ Image
The cut-out is enlarged and then mirrored. The edges of the background
image always act as a border on which the cut-out is clipped.
Other Mixground Layers
You cannot only position cut-outs as mixground layers, but also any layer,
e.g. texts, tints, gradients or background images. The figure below
shows an example.
Fig. 11-5
Tints Positioned as Mixground Layers
The blue tint was created using a path (STAR) and then inserted as a mixground
layer into the image layer. The star is only visible within the limits
of the image layer, the corners are cut off at the image edges. The text
was inserted into the star as a mixground layer.
About ‘Overlapped Background Images’
An ‘overlapped background image’ is the combination of a background
image and a cut-out created from the same image. ORIS PDF Tuner automatically
adjusts the cut-out to the position and size of the background
image. The following figure shows an example.
ORIS PDF Tuner Version 4.4.8 User Manual 11-3
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com