ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Exporting Layouts
Using Bleed Pages
http://www.image2output.com
the layer and the lower left corner of the area in which this layer is positioned.
On the output document this distance can be calculated in two ways:
• Relative position
The distance between the layer and the corner of the page area is adjusted
to the size of the document you are processing. If the document
has twice the size of the bleed page, for example, the distance
will also be twice as large.
Use this setting for elements such as crop marks and register marks
which must always be positioned at corners, centers or other fixed
positions.
To position layers relatively, you have to flag them using the MARK
function in the MENU window (see page 16-17).
• Absolute position
The distance is always the same as on the bleed page, even if the
document you are processing has a different size.
Use this setting for elements consisting of multiple layers, e.g. logos.
This makes sure that these layers remain together, i.e. that no space
is added between them.
To position layers absolutely make sure they are not marked.
Example
In this example, an A3 page (left) is merged with an A4-sized bleed page
(center) on which most layers have been positioned relatively and some
absolutely. The resulting output document is shown on the right.
3-64 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com