ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Exporting Layouts
‘Page’ Tab
‘Page’ Tab
Fig. 3-15
‘Page’ Tab (EPS) (‘Export Layout’ Dialog)
Use resolution of original page
If this option is disabled, you have to enter the output RESOLUTION and,
depending on the output format, also select a HIGH RESOLUTION factor.
The following occurs if this option is enabled:
The output resolution is set to the EXPECTED PRODUCTION RESOLUTION
that was specified using the FILE | LAYOUT PARAMETERS command (see
page 5-9).
PDF, EPS,
PS only
Resolution
Enter the output resolution to be used for the following page elements:
• GRADIENTS calculated as images (see page 3-16)
• Images which are resampled to another resolution (e.g. because the
REDUCE IMAGE RESOLUTION option is enabled, see page 3-24)
• ORIS PDF Tuner layers that are transparent, soft-edged, trapped or
modified by a filter layer (see page 17-1, page 3-53 and 15-1)
ORIS PDF Tuner Version 4.4.8 User Manual 3-31
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com