ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Editing Linework
Modifying Linework Colors
http://www.image2output.com
Related topics:
Defining Mask and Background Colors (page 26-10)
Selecting Colors (page 10-8)
Hiding Linework Masks (page 26-10)
Filling Multiple Color Areas
How to fill the same color into multiple linework color areas:
1. Select FILL IN in the MENU window. FILL IN AREA appears in the STATUS
window.
2. Select CMYK COLOR in the MENU window and choose the new color
(see also page 10-8).
3. You can set individual color separations to transparent using C/M/Y/
K TRANSPARENT in the MENU window.
4. Click on the linework area to be filled with the selected color. Repeat
this for all color areas you want to fill.
5. Repeat steps 2 to 4 until you have filled all color areas you want.
Undoing Modifications
Using UNDO 1 FILL you can undo the last fill operation and thus reverse
filling step by step. Using UNDO ALL FILLS you can undo all operations
made after selecting FILL TO. These functions appear in the MENU window
after the first modification.
Flood Filling
This editing method is similar to Photoshop’s Paint Bucket tool. When
you click on the linework, the new color will also be filled into all neighboring
color areas, except for that of the selected linework color and all
color areas enclosed by it.
Fig. 26-2
Example of a Flood Fill
In this example, the man’s hair and the outline of his shirt belong to
the same linework color (K100). All color areas enclosed by this color
are filled with red color in one go. To do so, you must select the K100
26-4 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com