ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Tips and Tricks
Entering Relative Values
Whether the first number is interpreted as Cicero, Pica or any other unit
depends on the definition of the pt unit made with the FILE | SYSTEM
SETUP | SPECIAL UNITS command (see page 31-4).
Closing Dialog
Press RETURN/ENTER when the cursor is in the right-hand input box. If
you do not want to apply the changes, press ESC, or click or .
Entering Relative Values
Note:
When entering values directly you can specify coordinates using relative
values. A relative value indicates how much the X or Y value of the new
coordinate differs from the coordinate specified last. If none has been
specified yet, the value is relative to 0/0.
Example:
Suppose you are creating a line using the PATHS | GRID & LINES | CON-
NECTED POINTS function. You have set the first point with the mouse by
clicking on the coordinate 13.523/25.615. The next line section should
be exactly 40 mm long and run vertically upwards.
You could now type 13.523/65.615 to specify the second coordinate, but
it is much easier to type 0/40 and select the unit dmm.
Pressing the D key selects the dmm, dinch, dpt or dspecial unit or
toggles between these units, respectively.
Fig. 29-4
Specifying Relative Values
Related topics:
Moving Precisely by Adding Distance
Supported Units and Their Abbreviations (page 32-12)
Printing
High-Quality Proof Printing
Use the ORIS Color Tuner software to high-quality contract proofs of
ORIS PDF Tuner layouts, images, PDF documents and other file formats.
ORIS PDF Tuner Version 4.4.8 User Manual 29-9
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com