ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Correcting Gradients
Creating Tints and Gradients
Gradients
Gradients can be corrected at any time. It is possible to change each
base point in color and position and to add and delete base points.
If a gradient layer is no longer active (i.e. you have left the gradient function),
you must first do the following:
1. Activate the layer (see page 16-1)
Note that you can only correct one gradient layer at a time.
2. Click or select CORRECT in the EDIT menu or MENU window.
3. Follow the instructions in the sections below.
Modifying Gradient Colors
1. Select the base point whose color you want to correct.
• Next point: CTRL-click (Mac OS) or right-click (Windows).
• Previous point: SHIFT-CTRL-click/SHIFT-right-click.
The selected point is marked with a cross-hair cursor. Its color values
are displayed in the STATUS window.
2. Click on the layout. The COLOR SELECTION dialog appears.
3. Define the new color (see page 10-8).
Changing Base Point Position
1. Select the base point whose position you want to correct:
• Next point: CTRL-click (Mac OS) or right-click (Windows).
• Previous point: SHIFT-CTRL-click/SHIFT-right-click.
2. Select CORRECT COORDinate in the MENU window.
If you have selected this function by accident, CTRL-click (Mac OS) or
right-click (Windows) to leave it.
3. To define the new position for the base point, click on the layout or
enter the corresponding coordinate (direct input, see page 29-7).
The COLOR SELECTION dialog appears (see page 10-8).
4. You can now define a new color for the current base point (see
page 10-8). To leave the color unchanged select OK.
ORIS PDF Tuner Version 4.4.8 User Manual 10-3
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com