ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Display and Measure Functions
Zooming In and Out
Note:
Having zoomed in on a layout, only the magnified layout section is loaded.
It is therefore impossible to make other parts visible by means of
panning (exception: pixel zoom, see page 30-15).
Zooming in Preset Increments
There are various methods to magnify or reduce an image or layout to
the next preset percentage.
Working in Zoom Mode
To enter zoom mode, click or select VIEW | ZOOM. A check mark next
to the ZOOM function indicates that the zoom mode is active. The cursor
becomes a magnifying glass with a plus sign indicating zoom in mode.
• To zoom in, click the center of the area you want to magnify.
When the maximum magnification level (1600%) has been reached,
the magnifying glass appears empty .
• To zoom out, hold down the OPTION (Mac OS) or CTRL (Windows)
key and click on the center of the area you want to reduce.
The cursor is now displayed with a minus sign in its center to indicate
that the zoom out mode is active.
To exit zoom mode, reclick or reselect VIEW | ZOOM. The check mark
next to the ZOOM function disappears.
Fig. 30-4
‘View’ Menu with Zoom Functions
Zooming with Shortkeys
The following methods allow you to quickly zoom in and out without having
to explicitly enter and exit zoom mode.
Method 1
• To zoom in, press ++ (Mac OS) or CTRL++ (Windows). Alternatively,
use the VIEW | ZOOM IN function on the pull-down menu.
ORIS PDF Tuner Version 4.4.8 User Manual 30-13
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com