ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Inserting Images Into Layout
Placing Background Images
• Click if you want to define transparency, soft edges or trapping
(see page 17-1 and 18-1).
Note:
If a background image does not fill its path or mask entirely, a white area
is displayed around the image and layers located under this area are not
visible. However, the screen is displayed normally as soon as you end
the current function.
Modifying Background Images
Images inserted into a path or mask can be modified at any time. ORIS
PDF Tuner offers three fundamentally different methods:
• Correcting an image behind its path/mask
• Modifying the image layer like a cut-out (see page 11-7)
• Changing the layer outline (see page 11-8)
Correcting an Image Behind its Path/Mask
With this method the image is modified ‘behind’ its path or mask that
clips the image. The position and size of the clipping element remain the
same. If the image is moved, other parts of the image become visible. If
it is enlarged, the visible image section becomes smaller. The following
figure shows an example.
Fig. 11-7
Enlarging a Background Image Behind its Mask
This image is enlarged ‘behind’ the path that clips it, which reduces the
image section that is visible on the screen. In other words, the layer contents
changes, while the layer size and outline remain the same.
How to Correct Background Images
1. Activate the image layer (see page 16-1).
2. Click , or press +M (Mac OS) or CTRL+M (Windows).
Alternatively, select CORRECT on the EDIT menu or MENU window.
This function cannot be applied if several layers are active.
ORIS PDF Tuner Version 4.4.8 User Manual 11-5
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com