ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Retouching
Inserting Image Areas into Images
Tip:
6. You can move the inserted image section, resize and rotate it using
the handles and transform it in many different ways using the
TRANSFORMATIONS toolbar. For more details refer to page 19-1.
Click if you want to set the inserted image to transparent or to create
soft edges. For more details refer to page 17-1.
7. Press RETURN/ENTER or click to continue retouching.
8. You can now retouch the image as usual and also erase parts of the
inserted area.
To cause the inserted area to melt smoothly with its background,
select a blurred brush border (GAUSS or LINEAR), make sure ERASER
EFFECTS is enabled (use the toggle function in the MENU window) and
erase at the edges of the inserted area (see also page 23-9).
9. You can insert the masked area again. To do so, repeat these actions
from step 5.
Example: Adding Image Background
Suppose you want to enlarge a small stripe of blue sky at the upper image
edge so that the sky extends further to the top. The background
should appear as natural as possible, i.e., the structure of the clouds and
the blue shades of the sky should not be interrupted.
Fig. 23-4
Adding Image Background (Example)
ORIS PDF Tuner Version 4.4.8 User Manual 23-13
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com