ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Gradation Changes and Tone Value Corrections
Additional Options
Fig. 25-12
Status Area of ‘Color Gradation’/‘Tone Correction’ Window
Changes will affect:
• masked image areas or
• entire image (here)
Current mode
(SPLINE, EFFECT or TONE VALUE)
Color separations to be changed
Coordinates of curve points
(only in SPLINE mode)
Additional Options
Note:
Saving and Loading Settings
Gradation and tone value settings can be saved and thus applied to any
other image. Use the following functions in the menu on the right of the
COLOR GRADATION or TONE CORRECTION window (see Fig. 25-11).
To save the current setting
Select STORE, type a name, then click OK.
To delete the current setting
Load the setting to be deleted, then select DELETE.
To load a setting
Select LOAD. The list of stored settings appears (see below). Doubleclick
the setting to be loaded.
When loading a setting, the mode (SPLINE, EFFECT, TONE VALUE) that
was used for creating the setting is selected automatically. In addition,
the color separations that can be edited are selected as follows:
• CMYK, CMY or RGB if these separations are identical
• Otherwise Yellow or Blue, respectively
Fig. 25-13
List of Stored Gradation and Tone Value Settings
ORIS PDF Tuner Version 4.4.8 User Manual 25-11
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com