ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Dialog Buttons
Transparency and Soft Edges
Creating Transparency for Layers
The buttons on the right of the TRANSPARENCY, TRAPPING, SOFT EDGES
dialog have the following meaning:
All Opaque
Removes any transparency from the active layers. This button has no effect
on soft edges or trapping.
Reset
Restores the initial settings that existed when the dialog was opened.
This applies to both transparency, soft edges and trapping.
Overprint
Use this button to set tints to overprint. This automatically sets a tint to
transparent in all CMYK and spot color separations which are not contained
in the tint.
The transparent separations are displayed in the STATUS window (see
page 17-9). If this button is applied to a spot color layer, the information
OVERPRINT appears in the STATUS window.
This button applies only to tints. It has no effect on other layer types.
Load
Displays a list of all stored settings. There is a separate list for transparency,
soft edge and trapping settings. You can load a setting by doubleclicking
it. Click the list header to sort the list in ascending or descending
order.
Store
Saves the current parameters to the list corresponding to the current
function (transparency, soft edges or trapping). Enter a name for the parameter
set, then click OK.
Delete
http://www.image2output.com
Deletes the currently loaded setting without any warning.
ORIS PDF Tuner Version 4.4.8 User Manual 17-7
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com