ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Using Images
Opening Images
http://www.image2output.com
Opening Images
There are two ways of opening an image:
• Select it by appearance
Selecting images from the image overview is usually the most
convenient method.
• Select it by file name
Browsing for an image file or entering the file name is sometimes
faster, but it requires that you know the file name.
Note:
Any image with a supported format can also be opened as a layout (see
page 5-2). You can open a maximum of 28 image windows.
Selecting Images by Appearance
1. Click to open the current image overview. If your image does not
appear there, use OPEN OVERVIEW in the MENU window to select another
directory. For more details refer to Selecting Image Overviews
(page 20-3) and Leafing Through Large Overviews (page 20-4).
2. If the image is extremely large and your main memory rather small,
you may want to load the image with a reduced resolution. In this
case enable the LOAD COARSE option in the MENU window.
See also Loading as Low-res Image or Preview (page 20-8).
Note:
3. To open an image, double-click on its thumbnail.
Alternatively, select a thumbnail using
, then press RE-
TURN/ENTER or click OPEN in the MENU window. You can also select
multiple images at the same time.
See also Selecting Images from Image Overview (page 20-4).
4. If ICC Color Management is enabled (see page 30-1), the MODIFY
ICC PROFILE dialog may appear and you have to select an ICC profile.
If you have mistakingly selected an image which takes extremely long to
load, you can cancel the loading process by pressing ESC, , or .
20-6 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com