ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Glossary
CropBox
CropBox
Filter Layers
Gradient
See MediaBox.
http://www.image2output.com
Filter layers allows you to use image modification functions on
a layout (e.g. gradation changes or color transformations).
Thus you can e.g. improve the colors of an image without having
to modify the image file.
A filter layer acts on all layers (of any type) located below it, i.e.
layers with a lower layer number. If there are several filter layers
placed upon each other, the effects add to each other. The
filter layer itself has no color and is therefore invisible if there
are no layers located below it.
See also Using Filter Layers (page 15-1).
A layer consisting of several colors shading into each other (as
opposed to a tint). There are two types of gradients: linear and
circular (see figure).
Hexachrome
A PANTONE® 1 high-fidelity color scheme that uses a six-color
process in color reproduction that can achieve a larger color
gamut than conventional four-color separations.
Hexachrome adds fluorescent orange and green inks to an
enhanced CMYK set, producing CMYKOG.
Fig. 33-1
Hexachrome Process Print Colors
HiFi Printing
Layer
High-fidelity color printing is a technology that raises printing
quality above the accepted limitations of normal four-color
offset. This implies some alteration or addition to the standard
four-color process ink set, which allows the press to print a
wider range of colors.
Examples of this approach are the Hexachrome (CMYK+orange+green)
and the Opaltone process (CMYK+RGB).
A layer is an object on an ORIS PDF Tuner layout that will appear
on the final printed page. There are different layer types,
e.g.
1. PANTONE® and other Pantone, Inc. trademarks are the property
of Pantone, Inc.
33-2 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com