ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Importing PDF and PostScript Files
‘Correct’ Tab
‘Correct’ Tab
Spot Color Usage
http://www.image2output.com
The program checks whether any spot colors are used in a document.
Spot colors inside images are also checked.
Multiple CMYK equivalents
The program checks whether there are several contradictory CMYK
equivalents defined for the same spot color.
Warnings During JPEG Decompression
The program checks whether the documents use any JPEG images
which may possibly be corrupted. This allows you to detect corrupted
images caused by JPEG compression errors.
Use of PDF 1.4 Transparencies
The program checks whether any PDF 1.4 transparencies are used in
the documents.
Fig. 2-12
‘Correct’ Tab (PDF/PS Input)
Minimum width for lines
Use this option to set all narrow lines to a fixed width. Enter 0.75 mm, for
example, to set all lines that are narrower than 0.75 mm to a width of
0.75 mm. Enter 0 if you do not want to modify any lines.
See also Use of Hairlines (page 2-15).
Always knock out white tints
If this option is enabled, overprint commands specified for white tints are
always ignored. This makes sure that white tints do not disappear if accidentally
set to overprint.
2-18 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com