ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Exporting Layouts
Using Bleed Pages
Predefined Bleed Page
A predefined bleed page resides in the ORIS installation directory under
the name Bleedpage.ddp. The default location is ..\Program
Files\CGS\Common Files\Extras on Windows systems.
This bleed page adds the document name, page size, creation date,
user name and the separation names. It also creates crop and register
marks. You can use this page as a template for your own bleed pages.
Fig. 3-27
Predefined Bleed Page
Variables for layout size and color separation
(4 process, 8 spot color separations)
Variables for layout name, modification
date and user name
Register mark
Bleed margin 13.5 mm
Page format without bleed:
A4 (210 x 297 mm)
Crop mark
Adding a Bleed Page
To add a bleed page to your documents, select the PAGE MARKS tab and
choose BLEED PAGE from the list labeled PAGE MARKS/BLEED PAGE. Then
specify a bleed page using the BLEED PAGE option (see page 3-45).
If the bleed page adds the page width and height, you can use the UNIT
OF MEASUREMENT option to select the unit to be used for these values.
Creating Your Own Bleed Page
Bleed pages can be created and edited with ORIS PDF Tuner. We recommend
to use the predefined bleed page Bleedpage.ddp as a template
and modify it according to your requirements.
Before doing so, you should save the predefined bleed page under a
new name or to another directory, because the original file will be overwritten
when a new software version is installed.
ORIS PDF Tuner Version 4.4.8 User Manual 3-61
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com