ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Modifying Layers
Activating Layers
Fig. 16-3
Drawing a Selection Rectangle Around Two Layers
Activating a Range of Contiguous Layers
To easily activate all layers from number 17 through 24, for example, you
can proceed as follows (only on Windows systems):
1. Activate layer number 17, e.g. by clicking on it.
2. CTRL-click layer number 24.
This will additionally activate the layers 18, 19, 20, 21, 22, 23 and 24.
Activating All Tint Layers of Same Color
To activate all tint layers on a layout that have the same color:
1. Activate one of the tint layers, e.g. by clicking on it.
2. Select the SELECT BY COLOR function in the MENU window. The COL-
OR SELECTION dialog appears (see page 10-8). The color of the selected
layer appears in the color selection box.
3. Click OK to close the dialog. All tint layers having the selected color
become active.
Note:
You can also choose the SELECT BY COLOR function without having activated
a tint layer beforehand. In this case you can specify the color you
want in the COLOR SELECTION dialog, e.g. by clicking on a color box.
You should not pick colors from a layout (by SHIFT-clicking), as this may
change the color values slightly, making it impossible to activate the layers
you want.
To Activate all Layers of Imported PDF/PS/EPS
Files
Having imported a PDF, PostScript or EPS document into an existing
layout, all layers created from this document can be activated simultaneously
and then modified as a group.
ORIS PDF Tuner Version 4.4.8 User Manual 16-3
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com