ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Creating Standard Paths
Rectangle Editor
Modifying Rectangles with Handles
Any active rectangle has handles which allow quick scaling, rotating,
skewing and corner modification (see Fig. 7-2).
Move the handles with the mouse button pressed down. To keep proportions
constant when scaling, hold the SHIFT key pressed down.
Fig. 7-2
Handles of a Rectangle (Example)
Selected
corner
3 2 3
Changes corner
1 lengths
1
3 2 3
Handles on the corners change the
width (1), height (2) or both (3)
Changes
skewing angle
Changes
rotation angle
Changing Rectangle Corners
1. Select the corner to be modified. To modify all corners at the same
time, make sure the ALL CORNERS option is enabled. Otherwise disable
this option and do one of the following:
• Click one of the four buttons at the right end of the
dialog. Each button represents a corner.
• Click on the corner handle (see Fig. 7-2).
• Make sure the cursor is not positioned on a handle, then CTRLclick
(Mac OS) or right-click (Windows) repeatedly to step
through the four corners.
The selected corner is marked by a frame around the handle.
2. Select the corner form by doing one of the following:
• Click one of
these dialog
buttons:
normal
bevelled
rounded
inversely
rounded
• Position the cursor on the corner handle, then CTRL-click (Mac
OS) or right-click (Windows) repeatedly. Each click selects one of
the four corner forms.
ORIS PDF Tuner Version 4.4.8 User Manual 7-3
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com