ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Editing Linework
Painting and Pixel Copy
http://www.image2output.com
Pixel Copy
The linework editor allows you to copy pixels to another position. This is
similar to the Clone Stamp tool in Photoshop.
1. Select DRAW in the MENU window. DRAW COLOR appears in the
STATUS window to indicate that this mode is active.
2. Select DYN. COPY in the MENU window (unless this mode is already
active). Two cursors which are almost on top of each other appear
(see figure below).
3. To modify the distance between the cursors, position the source cursor,
then move the target cursor with SHIFT+CTRL pressed down (Mac
OS) or SHIFT and the right mouse button (Windows).
4. You can now start copying the linework pixels.
To erase, hold the SHIFT key pressed down.
To increase brush size, CTRL-click (Mac OS) or right-click (Windows).
To reduce brush size, CTRL-click or right-click repeatedly until the
maximum size is reached. The next click will reset the brush size to 0.
Use UNDO in the MENU window if you want to reverse all modifications
made after selecting DRAW.
See also Paint/Copy Parameters below.
Fig. 26-3 Copying Pixels from Source to Target Cursor
Source cursor Target cursor
Dashed line Full line
Paint/Copy Parameters
The following functions for drawing and copying on linework are available
in the MENU window:
Dot/Line
Use this function to toggle between two settings:
• If DOT MODE appears in the STATUS window, quick cursor movements
produce single points. Points are never connected with each
other.
26-8 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com