ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Modifying Layers
Changing Stacking Order
Changing Stacking Order
Note:
Each printable object on a layout is located on a separate level and
therefore referred to as a layer. Each level is identified by a unique layer
number. The order in which layers lie on top of each other (stacking order)
can be changed. If a layer is hidden it can be moved up to a higher
level, for example.
First of all, activate (see page 16-1) all layers to be shifted to another level.
Then select INSERT SELECTION in the MENU window and do one of the
following:
• Click on the layer on top of which you want to place the active layers.
This layer must not be one of the active layers.
Alternatively, enter the layer number directly (see page 29-7).
• CTRL-click (Mac OS) or right-click (Windows) repeatedly. Each
mouse click shifts the layer up by one level.
Additionally press the SHIFT key to shift the layers down.
To continue activating layers, reselect INSERT SELECTION.
• Select TOP LAYER in the MENU window to place the layers on top of
all other layers.
• Click on the background layer or enter the layer number 1 to place
the layers below all other layers.
The background layer (layer #1) cannot be shifted to another level.
Neither is it possible to place a layer below the background layer.
Fig. 16-10
Changing the Stacking Order (Example)
The yellow headline is hidden by the image. To move it on top of the
image, activate the headline, select INSERT SELECTION and click on the
image.
ORIS PDF Tuner Version 4.4.8 User Manual 16-15
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com