ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Working With Paths
Saving and Importing Paths
http://www.image2output.com
4. Repeat the last step to frame the horizontal lines.
5. You can correct these parameters if the framing function is still active.
Proceed as described under Corrections (page 8-8).
If you enter positive values, the grid rectangles remain within the borders
of the original grid. If you enter negative values, the outer rectangles surpass
these borders.
Framing Parallel Lines
Parallel lines (see page 7-8) can be framed in the following way:
• A centered frame is created for the inner lines
• The outer lines are framed inwards if positive values are specified
and outwards if negative values are specified.
1. Activate the parallel lines (see page 8-1).
You can only activate one set of parallel lines at a time.
2. Select PATHS | MORE FRAMES | GRID & PARALLEL LINES.
3. Define the frame size by doing one of the following:
• Click the (left) mouse button, then move the mouse vertically.
The value corresponding to the cursor position is displayed on
the status bar. Click again when the value you want is reached.
• Enter the value on the keyboard (direct input).
4. If the framing function is still active, you can correct the frame size as
described under Corrections (page 8-8).
Saving and Importing Paths
You can save paths to a file so as to be able to insert them into other layouts.
Such files are automatically given the file extension .PAT.
Saving Paths
1. Activate all paths to be stored.
2. Select STORE in the MENU window.
3. Select a directory, type a name, then click SAVE.
4. Define the point to which the cursor will be attached when the paths
are imported into a layout. The default point is marked with a cross.
8-14 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com