ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Using Guides
Saving and Importing Guides
http://www.image2output.com
Switching Snapping Off/On
The ability to snap the cursor can be switched off and on for all guides.
To do so, press SHIFT+F7 or select GUIDES | SNAPPING. When disabled,
the cursor no longer snaps to guides, although they are still visible.
A check mark next to this function appears if snapping is enabled.
Saving and Importing Guides
In order to use the guides of a layout for other layouts, you must save
them separately to a file. This is especially useful for frequently used
standard layouts.
To save all guides on a layout to a file:
1. Click or select GUIDES | ACTIVATE.
2. Select SAVE the MENU window.
3. Enter a file name, select a directory and click SAVE.
To import saved guides into a layout:
1. Click or select GUIDES | ACTIVATE.
2. Select LOAD the MENU window.
3. Select the guide file (*.ALG) and click OPEN.
Note:
When importing stored guides, the new guides appear and the old
guides disappear and become inactive. They can be reactivated.
When saving a layout, all guides – including inactive and invisible guides
– are stored together with the layout. It is therefore advisable to delete
guides you no longer need before saving a layout.
6-10 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com