ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
31 Preferences
This chapter explains how to change some of the program’s configuration
settings so that they meet your requirements. These settings are
stored and used as default when you restart ORIS PDF Tuner.
Adjusting Monitor Colors
You can adjust the monitor colors to the requirements of your print process.
ORIS PDF Tuner allows you to specify your own RGB values for
each of the following primary colors:
Yellow Red (Y100M100) Black (Y100M100C100)
Magenta Green (Y100C100) White (Y0M0C0)
Cyan Blue (M100C100)
To adjust the monitor colors:
1. Open a CMYK image (see page 20-6).
2. Select FILE | SYSTEM SETUP | CMYK REPRESENTATION. The MONITOR
COLOR SETUP dialog appears.
3. Click the color box you want. The COLOR SELECTION dialog appears
(see page 10-8).
4. Modify the RGB values. As you change a value, the screen is updated
immediately and the image colors reflect your changes.
Note that layouts are only updated when you select VIEW | REBUILD
LAYOUT (F5).
5. If you want to reset the colors to their default values, select SYSTEM
DEFAULT from the list labeled USE TABLE.
ORIS PDF Tuner Version 4.4.8 User Manual 31-1
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com