ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Reference
Units and Values
http://www.image2output.com
Fig. 32-4
Abbreviations of Units (in Rectangle Editor)
Combining Cicero/Pica and Point Units
When the unit Cicero is selected, you can simultaneously specify Cicero
and Didot Points as well as decimal places for the Didot Points. Likewise,
you can also specify Pica Points (with decimal places) when the
unit Pica is selected.
Type all three values into the same input box and separate them by a period.
Examples:
Input
Meaning
2. ci 2 Cicero
2.10 ci 2 Cicero and 10 Didot Points
2.10.5 ci 2 Cicero and 10.5 Didot Points
0.10 ci or .10 ci 10 Didot Points
0.10.5 ci or .10.5 ci 10.5 Didot Points
2.10.5 pi 2 Pica and 10.5 Pica Points
2. ci 2 Cicero
2.10 ci 2 Cicero and 10 Didot Points
Note on Direct Input
The same method is used in the case of a direct input (see page 29-7) if
the unit pt (user-defined Points) is selected. For example, 2.10.5 pt
means 2 Cicero or Pica and 10.5 points. To specify half a point you must
enter 0.0.5 pt or .0.5 pt.
Whether the first number is interpreted as Cicero, Pica or any other unit
depends on the definition of the pt unit made with the FILE | SYSTEM
SETUP | SPECIAL UNITS command (see page 31-4).
See also Supported Units and Their Abbreviations (page 32-12).
32-14 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com