ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Exporting Layouts
‘Trapping/Soft Edges’ Tab
http://www.image2output.com
Fig. 3-24
Position of Soft Edges
INSIDE OUTSIDE INSIDE and OUTSIDE
The white outline indicates the position of the original (sharp) edge.
Apply to
Use this option to specify which types of images should be soft-edged:
• IMAGES
All images of a document, except linework and 1-bit files.
• EPS IMAGES WITH PATH CONTAINED IN PS FILE *
EPS images in PostScript files only, provided that the images have
been positioned using a non-rectangular path.
• ANY IMAGE WITH PATH CONTAINED IN PS FILE *
Images in PostScript files only. The image format does not matter, but
the images must have been positioned using a non-rectangular path.
Note:
The following information applies to ORIS PDF Tuner layouts:
• Soft edges are not created for images with trapping or soft edges.
• The options marked with * affect only images in PS files which were
imported using the FILE | OPEN or IMPORT PDF OR POSTSCRIPT command.
They also affect cut-outs created with ORIS PDF Tuner.
Black overprint
This option applies to black (K100) high-res elements such as tints or
text.
• If enabled, black objects are set to overprint, i.e. printed on top of
cyan, magenta and yellow ink.
• If disabled, black objects are set to knock out, i.e. cyan, magenta
and yellow ink for underlying objects is not printed.
3-52 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com