ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Working With Paths
Deleting Paths
Deleting Paths
To delete activated paths:
1. Activate the paths you want to delete (see page 8-1).
2. Click , select EDIT | DELETE, or press BACKSPACE (Mac OS) or
DELETE (Windows).
To delete all unused paths:
To delete all paths on a layout at the same time, including inactive paths:
1. It is advisable to select VIEW | PATH AND MASK DISPLAY ON to make
sure you do not delete any paths you still need.
2. Click or select PATHS | ACTIVATE.
3. Select DELETE UNUSED in the MENU window.
4. A question dialog appears. Click OK if you really want to delete.
Note:
Paths defining the outline of layers cannot be deleted. It is not possible
to reverse the deletion of paths (no undo!).
Splitting Grids into Rectangles
A grid (see page 7-5) can be split into individual rectangles without any
outer border. You can define the size of the individual rectangles. The
original grid remains unchanged.
1. Activate the grid (see page 8-1).
This function can only be applied to one grid at a time.
2. Select PATHS | EDIT | RECTANGLES FROM GRID.
3. First the grid is split into individual columns. Define the width of these
columns by doing one of the following:
• Click the (left) mouse button, then move the mouse vertically.
The value corresponding to the cursor position appears on the
status bar. Click again when the value you want is reached.
• Enter the value on the keyboard (direct input).
4. The columns are now divided into individual rectangles. You can define
the height of these rectangles in the same way.
ORIS PDF Tuner Version 4.4.8 User Manual 8-9
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com