ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Transparency and Soft Edges
Creating Transparency for Layers
‘By Separation’ Tab (Transparency...)
Use this dialog tab if you want to set the transparency of each color separation
to a different value. You can use the sliders or enter the degree
of transparency into the input boxes. For help on the COMPLEX SETTINGS
option refer to the previous section.
Fig. 17-2
‘By Separation’ Tab (‘Transparency, Trapping...’ Dialog)
‘Complex’ Tab (Transparency...)
This dialog tab allows you to define complex transparency settings which
may also involve color transformations. For each color separation you
can specify the amount of C, M, Y and K to be used from the current layer
(FOREGROUND) and the layers behind it (BACKGROUND).
Fig. 17-3
‘Complex’ Tab (‘Transparency, Trapping...’ Dialog)
Proceed as follows:
1. Use the TARGET SEPARation option to select the color separation to be
modified.
2. Use the sliders or input boxes beneath FOREGROUND to adjust the
percentage of C, M, Y and K to be used from the active layers themselves.
3. Use the sliders or input boxes beneath BACKGROUND to adjust the
percentage of C, M, Y and K to be used from the layers behind the
active layers.
You can specify positive values to add colors and negative values to
subtract them.
ORIS PDF Tuner Version 4.4.8 User Manual 17-3
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com