ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Display and Measure Functions
Updating Screen Display
Use as default
Enable the USE AS DEFAULT option to use the currently selected ICC profile,
rendering intent and input profile selection method the next time you
load an image whose color mode (CMYK, RGB or grayscales) corresponds
to that of the current image.
This option overwrites the DEFAULT INPUT COLOR SPACE settings in the
ICC COLOR MANAGEMENT dialog (see page 30-2).
More Information On Color Management
We recommend the following publications:
• Rudolph E. Burger, Color Management Systems, Color Resource
1993
• Dr. R.W.G. Hunt, The Reproduction Of Color In Photography, Printing
& Television, Fountain Press, Tolworth, England, ISBN 0 86343
088 0
• Prof. Dr. Stefan Brües, Liane May, Dietmar Fuchs: Postscriptum on
Color Management, LOGO GmbH 1999
We also recommend the following Web sites:
• European Color Initiative: http://www.eci.org/
• International Color Consortium: http://www.color.org/
Updating Screen Display
In certain cases it may be necessary to update the screen manually.
Having copied an image to an open image overview using the Macintosh
Finder or Windows Explorer, for example, you have to update the image
overview in order to see the new thumbnail.
To update the screen, press F5, or select VIEW | REBUILD LAYOUT or VIEW
| UPDATE.
Zooming In and Out
http://www.image2output.com
You can magnify or reduce the view of images and layouts using various
methods. The magnification level can be set to any value between
0.07% and 1600%. The current magnification level is shown in the window’s
title bar (unless the window is too small for the display to fit) and
in the STATUS window of images (see page 20-19).
30-12 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com