ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Importing PDF and PostScript Files
Syntax Description for ‘OPIPathRules.dat’
PostScript Printer Driver
We recommend to use the ORIS PostScript Printer Description (PPD)
file. The ORIS PPD creates PostScript documents which are perfectly
suited for being edited with ORIS programs. You can download the PPD
file from the CGS website http://www.cgs-oris.com.
QuarkXPress
http://www.image2output.com
Images With Transparent Background
In QuarkXPress the background color of an image can be set to transparent
by selecting the ‘color’ NONE. Due to an error in QuarkXPress, the
edges of such images become jaggy in print and after conversion into
ORIS PDF Tuner format.
Version 4.04
PostScript files created with QuarkXPress Version 4.04 may be erroneous,
i.e. do not comply with PostScript conventions. When importing
such files, the incorrect PostScript code is ignored and a warning is written
to the log file.
RGB–CMYK Conversion
The colors of RGB images separated automatically by QuarkXPress are
usually of poor quality. The Quark CMS XTension, however, allows you
to prevent this automatic separation or to control it using ICC profiles.
Syntax Description for ‘OPIPathRules.dat’
The file OPIPathRules.dat in the installation directory allows you to define
rules for modifying OPI image path names (see page 2-11).
You can add as many rules as you like. Each rule defines the path in
which high-res images are searched, by replacing certain characters in
the low-res image path. The substitution can be limited to images created
by specific OPI systems or on specific operating systems.
The syntax in this file is as follows:
[
]
These are positional parameters, i.e. you must always specify them in
the order indicated above and without leaving any ‘gaps’.
2-24 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com