ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Tips and Tricks
Replacing Low-Resolution Images
http://www.image2output.com
How to Replace Low-res Images
1. Set two guide points on prominent places of the image that are as far
from one another as possible (see also page 6-1).
In this example, we have set one point on
the girl’s nose and the other on the mountain
top at the right.
To set a guide point, select GUIDES | POINT,
then click on the layout. Having set the last
point, press RETURN/ENTER or click .
2. Click on the image layer to activate it.
3. Insert the high-res image into the layout.
To do so, click to open the image overview.
Then select the image you want (see
also page 20-6).
The high-res image appears on the layout
and the low-res image is automatically removed
from the layout.
The inserted image will most likely not be
located at exactly the same position. The
next steps explain how to reposition it.
4. Click the button on the TRANSFORMA-
TIONS toolbar. The image will be opened up
in a separate window.
Four points connected by lines are displayed.
The point on the lower left corner is
active, which is indicated by a frame.
29-2 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com