ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Exporting Layouts
Using Bleed Pages
http://www.image2output.com
Click on the list above to select the color separation whose MAXIMUM
TOLERANCE you want to change.
CT background color
This is the color the program assumes for the entire CT against which
the LW is trapped. It is used to decide whether trapping is required at all.
If the MODE is set to LW CT COLOR DEPENDENT, the program uses
this color to decide whether to choke or spread the LW to the CT.
The default color (used in the STANDARD profile) is C23 M20 Y12 K10,
which produces reasonably good results in many cases. Click on the
color box to select another color (see also page 10-8).
‘Save as’, ‘Export’ and ‘Delete’ Buttons
Save as
This button saves the parameters of both dialog tabs to a trapping profile.
The profile can then be selected on the TRAPPING/SOFT EDGES tab
of the EXPORT LAYOUT dialog. Enter a name for the new profile. If you enter
the name of an existing profile, it will be overwritten.
Export
This button allows you to export the trapping parameters to a file. They
can then be used in ORIS Works hotfolders which do not support the definition
of trapping rules and exceptions.
A file selection dialog opens and you must enter a name for the parameter
file. The extension .DDX is added automatically. Use the hotfolder
parameter TRAPPING PARAMETERS to select this file in ORIS Works.
Delete
This button deletes the trapping profile selected at the top of the dialog.
The STANDARD profile contains the program’s default settings. It can neither
be modified nor deleted.
Using Bleed Pages
The documents you are processing can be merged with a so-called
bleed page. A bleed page may contain objects that should appear on
every document, e.g. the file name or modification date. If located within
the bleed margins, these objects are always placed outside the page
borders, regardless of the current page size.
3-60 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com