ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Retouching
How to Retouch
The starting color is always the color selected using function 1. COLOR or
1. IMAGE COLOR respectively.
To obtain the fading effect, hold the mouse button pressed down and
drag the cursor across the image. Depending on the current mode, a line
is drawn that either becomes gradually invisible or blends into another
color. With the FADE COLOR 2 setting the line continues until you release
the mouse button, with FADE TRANSPARent the line ends as soon as the
second color is 100% transparent.
You can define the number of dots to be drawn between the first point
and the point at which full transparency or full second color is attained.
To do so, select FADE STEPS in the MENU window and enter the value on
the keyboard.
Covering Image Completely
You can completely overlay an image with a color and then erase this
color so that parts of the image become visible.
1. Select and create a rectangle which encloses the entire image.
2. Select IMAGE | RETOUCH and then TINT in the MENU window.
You can also create a linear GRADIENT or CIRCular GRADient.
3. Select a color (see page 10-8). The image will be covered completely.
4. Click and remove the color where you want to see the image.
To create soft edges at the erased areas, select the border type
GAUSS and switch on ERASER EFFECTS before erasing.
Related topics:
Painting and Erasing (page 23-3)
Using Current Brush Border When Erasing (page 23-9)
ORIS PDF Tuner Version 4.4.8 User Manual 23-11
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com