ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Exporting Layouts
‘Page Marks’ Tab
http://www.image2output.com
Crop marks
Use this parameter to create crop marks. These marks indicate the size
to which a page will be finally cropped. The distance between page border
and crop marks can be defined using the CORNER OFFSET option.
You can choose between the following types of crop marks:
NONE OUTLINE CORNERS
This parameter is only available if PAGE MARKS/BLEED PAGE has been set
to PAGE MARKS.
Note:
Corner Offset
When creating crop marks in the form of corners, use this option to define
the distance between page borders and crop marks.
This parameter is only available if PAGE MARKS/BLEED PAGE has been set
to PAGE MARKS.
Register marks
Use this parameter to create register marks. These marks are used for
achieving perfect alignment between color separations. You can select
the following types of register marks:
NONE CROSS CROSS AND CIRCLE
This parameter is only available if PAGE MARKS/BLEED PAGE has been set
to PAGE MARKS.
3-44 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com