ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Retouching
How to Retouch
http://www.image2output.com
6. For information on additional settings refer to
Brush Settings (page 23-7)
Retouching Parameters (page 23-8)
Special Retouching Options (page 23-10)
7. Now you can start retouching.
Use the and buttons to switch between painting and erasing.
See also Painting and Erasing (page 23-3).
8. You can save your changes temporarily by selecting FIX CHANGES in
the MENU window. Using UNDO you can reverse the last changes.
See also page 23-12.
9. You can compare the modified image with the original image or with
the last state saved temporarily. To do so, use the toggle function
SHOW BEFORE or press F4.
10.When finished, press RETURN/ENTER or click .
Fig. 23-1
‘Retouch’ Dialog
Erasing
Brush strokes
will erase color
Painting
Brush strokes
will apply color
Brush size
in pixels
Distance between dots
Indicates how far the mouse
has to be moved before a new
dot is brushed or erased
Brush
border
Blurred
or sharp
Retouching mode
e.g. brushing,
pixel copy or
color addition
Brush shape
Circle or box
Brush display
Enabled: Brush always
displayed as a cross
Disabled: Brush displayed
as a circle or box,
depending on the
current brush shape
Color density limit
When brushing repeatedly
on the same image area,
the color density increases
up to this value
Initial color density
Dot rate
Number of dots
per second to
be brushed
when the cursor
is not moved
Special options
e.g. transparent
retouching (default
is opaque)
Color
separations
to be modified
23-2 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com