ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Transformations
Moving
Method 2
1. Click into the input box titled X at the left end of
the toolbar to move horizontally. Click into the Y
box to move vertically.
2. Hold CTRL and the mouse button (Mac OS) or the right mouse button
(Windows) pressed down and move the mouse horizontally or vertically,
depending on the input box you have clicked.
Positioning By Entering Coordinate
1. Click , then click on the object’s point you want to position. This is
the object’s center by default. See also Defining Fixed Point.
2. Enter the new coordinate of this point into
the X and Y input boxes of the toolbar.
Alternatively, use the and tools to position objects accurately on
a specific point. For more details refer to
Positioning Objects Accurately (page 19-15)
Specifying Points for Positioning/Distorting (page 19-19)
Moving Precisely by Adding Distance
To move objects exactly by a specific value, you can add and subtract
values from its current coordinate. Enter the operator (+ or -) and the value
to be added or subtracted between the current X/Y value and the unit.
To move an object positioned at X = 2.602 mm to the
right by two millimeters, for example, enter +2 into
the X input box (which then reads 2.602 +2 mm),
then press RETURN/ENTER. To move an object down
by 2 mm, for example, enter –2 into the Y input box.
See also Entering Relative Values (page 29-9).
Note:
All of the input boxes of the TRANSFORMATIONS toolbar are like simple
calculators allowing you to use the four basic arithmetic operations:
Addition (+), subtraction (-), multiplication (*) and division (/).
ORIS PDF Tuner Version 4.4.8 User Manual 19-5
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com