ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Creating ‘Smooth Text’
Smooth Text Adjusting to Two Lines
Bottom
With this setting the bottom of the
text touches the baseline, i.e., the
text is placed above the baseline.
Top
With this setting the upper line becomes
the base line. The text is set
upside down.
Setting Direction 1/2
Set both SETTING DIRECTion options (1 and 2)
to COUNTER-CLockWise in order to mirror the
text. Set both options to CLOCKWISE to display
the text normally.
Trafo Type
The TRAnsFOrmation TYPE option allows you to define the way the text
will be transformed when being scaled. The result is similar to smooth
text adjusting to a single line (see page 13-4).
• CHARacter SIZE – All of the text characters are scaled equally.
• CHARacter SPACE – Only character spacing is modified. The character
size remains unchanged.
• WORD SPACE – Only word spacing is modified. Both character size
and space within words remain unchanged. If the text consists of
only one word, this setting modifies the character space.
Move
Use this button to move the text within the two lines without any scaling.
All characters follow the shape of the lines and adjust to their inclination.
ORIS PDF Tuner Version 4.4.8 User Manual 13-7
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com