ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Exporting Layouts
‘Select’ Tab
http://www.image2output.com
Color, to color, Tints, Text
Use the parameters at the bottom of this dialog if tints and/or text with
particular colors should be omitted or included, respectively, depending
on the SELECT MODE (see above).
You can also specify a range of similar process colors, for example, all
colors between C100M10 and C100M50. The two colors may only differ
in one color separation. It is therefore not possible to specify ranges like
‘C100M10 to C100M50Y30’. Color ranges are not supported for spot
colors. Specifying a spot color applies to all tonal values of this color.
Note:
These parameters have no effect on tints contained in EPS files. Tints
with colors specified here are not omitted if they are part of an EPS file.
How to Specify Colors
1. Click ADD to open the COLOR SELECTION dialog (see page 10-8) and
select a color.
The color is now displayed in the left-hand color box. The tonal values
or spot color name, respectively, appear in the left-hand list column.
2. If you have selected a process color, you can specify a color range.
To do so, enable the TO COLOR option and select the second color.
This color is displayed in the right-hand color box and in the list column
labeled TO COLOR.
3. Specify which types of page elements to omit or include, respectively.
To do so, click on the TINTS and/or TEXT check boxes. The current setting
(YES/NO) is indicated in the list columns labeled TINTS and TEXT.
4. Using the DELETE button you can remove the current list item.
3-50 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com