ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Exporting Layouts
‘Select’ Tab
Text, Images, Linework…
Use the following options to select the page elements to be omitted or
included according to the SELECT MODE parameter:
TEXT
Any text on a page. You can also use the options at the bottom to omit
or include text of a specific color or color range (see page 3-50).
IMAGES
All images except linework and 1-bit images. This option can be used
to omit low-res images which will be replaced by high-res data, if the
output format does not support OPI (see page 3-35).
Note:
LINEWORK
Linework, 1-bit images and also pixel masks filled with a color in
ORIS PDF Tuner.
This option can be used, for example, to omit all high-res page elements
from Scitex Handshake, TIFF/IT or Flat PDF/EPS/PS documents.
See also page 3-32.
It is not possible to knock out omitted linework data.
PAGE EPS FILES
This options refers only to Page EPS files used on ORIS PDF Tuner
layouts or added to a document using the OPI function (when low-res
images in PS or PDF documents are replaced, see page 2-9).
Page EPS files are documents containing more elements than just a
single image, in contrast to Image EPS files (see also page 20-21).
TRANSPARENT AND SOFT-EDGED LAYERS
Page elements with transparency or soft edges. Note that soft edges
can be created automatically when converting documents by using
the options on the TRAPPING/SOFT EDGES tab (see page 3-51).
MARKED LAYERS
Layers flagged with the MARK command on ORIS PDF Tuner layouts.
See Marking Layers for Layout Export (page 16-17).
DUMMY TEXT
All dummy text layers created on an ORIS PDF Tuner layout.
ORIS PDF Tuner Version 4.4.8 User Manual 3-49
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com