ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Using Guides
Creating Guides
http://www.image2output.com
Changing Snap Area
d
d
Having positioned a guide, lines indicating the default snap area appear
(see page 6-2). Now you can change the snap area as follows:
1. SHIFT-CTRL-click (Mac OS) or SHIFT-right-click (Windows) on the layout.
The letter d in the STATUS window is displayed in boldface type,
indicating that the snap area value is selected.
2. SHIFT-click on the layout, move the mouse vertically, then click the
(left) mouse button. Alternatively, enter the size of the snap area on
the keyboard (direct input, see page 29-7).
The distance between the lines indicating the snap area borders
changes.
Parallel and Perpendicular Guides
Having created a horizontal, vertical or inclined guide, you can define
any number of guides running parallel or perpendicular to this guide, all
having the same distance from each other.
1. Having created the guide, select PARALLEL or 90 DEGREES respectively
in the MENU window.
A parallel or perpendicular guide appears on the screen. You can
move this guide with the mouse.
2. Define the distance between the guides. To do so, click on the layout
or enter the distance on the keyboard (direct input).
The position depends on whether positive or negative values are entered.
When creating parallel guides for a vertical guide, for example,
use a positive number to create the guides to the right and a negative
number to create them to the left of the original guide.
3. If you want to create more than one parallel or perpendicular guide,
specify the number of guides to be created. Do one of the following:
• First SHIFT-CTRL-click (Mac OS) or SHIFT-right-click (Windows)
on the layout. Then SHIFT-click and move the mouse vertically.
Finally, click the (left) mouse button.
• Enter the number of guides on the keyboard (direct input).
4. Repeat steps 2 and 3 to create additional parallel or perpendicular
guides.
6-4 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com