ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Editing Linework
Painting and Pixel Copy
This is only possible in the SELECT, MODIFY and FILL TO modes.
• Select COLOR TABLE in the MENU window.
A list of all colors defined for the linework appears. Each color is identified
by a unique number. Select the color you want, e.g. with a double-click.
• Enter the color number directly on the keyboard (see page 29-7).
All linework areas having the selected color become active and are covered
by a mask. Using the MASK COLOR function you can change the
mask color (see page 26-10). The number of the selected color appears
in the STATUS window below CURRENT COLOR.
Related topics:
Linework Color Table (page 26-1)
Hiding Linework Masks (page 26-10)
Painting and Pixel Copy
Painting on a Linework
1. Select DRAW in the MENU window. DRAW COLOR appears in the STA-
TUS window to indicate that this mode is active.
2. If the DYN. COPY mode is active, select BRUSH in the MENU window.
3. Select CMYK COLOR in the MENU window and choose a color for
drawing (see also page 10-8).
4. You can set individual color separations to transparent using functions
C, M, Y and K TRANSPARENT in the MENU window.
5. You can now start painting on the linework.
To erase, hold the SHIFT key pressed down.
To increase brush size, CTRL-click (Mac OS) or right-click (Windows).
To reduce brush size, SHIFT-CTRL-click or SHIFT-right-click.
Use UNDO in the MENU window if you want to reverse all modifications
made after selecting DRAW.
See also Paint/Copy Parameters below.
ORIS PDF Tuner Version 4.4.8 User Manual 26-7
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com