ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Modifying Layers
Getting Information on Layers
S
G
Tint layer with a spot color (e.g. PANTONE® * or HKS® color)
The name of the spot color is displayed in the LAYER INFO window.
Tint layer that is part of a gradient formed by several adjacent
tint layers with slightly different colors.
Such layers are created during PostScript input if ORIS PDF
Tuner is unable to recognize a gradient. This usually occurs if a
gradient involves more than two colors. All layers marked with
a G become part of the low-resolution (CT) when the layout is
exported to another format.
The G attribute is removed when you apply the CORRECT function
( ) to an active layer.
* PANTONE® and other Pantone, Inc. trademarks are the property of
Pantone, Inc.
Layer type
There is one of the following displays:
TINT
GRADIENT
CIRCUL. GRADIENT
DUMMY TEXT
BACKGR. IMAGE
FOREGR. IMAGE
LINEWORK
MIXGR. IMAGE *)
MIXGROUND LW *)
COLOR GRADATION
COLOR
TRANSFORMATION
COLOR FILTER
Layer with a single color or a text layer
Linear gradient
Circular gradient
Placeholder for text
Background image
Foreground image (cut-out or brushed layer)
Cut-out positioned as a mixground image
Linework positioned as a mixground image
Filter layer performing a gradation change
Filter layer performing a color transformation
(including conversion to grayscales)
Filter layer for sharpening/softening, adding/
removing noise or pixelating
*) The number of the layer restricting (or clipping) the mixground
layer is displayed below the current layer number.
Status
One of the following is displayed:
OK
Normal status
DON’T SHOW A layer is hidden because of the settings on the
VIEW | VIEW LAYERS submenu.
ORIS PDF Tuner Version 4.4.8 User Manual 16-21
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com