ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

Using the Path Editor
Changing Screen Display
http://www.image2output.com
Changing Screen Display
Status Display
Hiding Paths
If there is a large number of complex paths, the screen display may easily
become unclear and confusing. In this case it may be useful to temporarily
switch off the display of paths you are currently not editing.
Proceed as follows:
1. Make sure points are displayed or marked on all paths you want to
hide (see page 9-6). Also make sure no points are displayed on the
paths you do not want to hide.
2. Select HIDE PATH in the MENU window to switch off the display of all
paths with displayed or marked points.
3. To display these paths again, select SHOW PATH.
Changing Path Color
When using the Path Editor for creating cut-outs you can define the color
to be used for active path elements. Select MASK COLOR in the MENU window
and choose a color. Inactive path elements are displayed in the
same color, but darker or lighter respectively. See also Selecting Colors
(page 10-8).
The following information is displayed in the STATUS window of the Path
Editor:
NO. OF PATHS
Total number of paths of the current path
NO. OF POINTS
Total number of points
POINT TYPE
Type of active point: CORNER or CURVE. If no point is active the type
is UNDEFINED.
POINT IS
Status of active point: MOVABLE or FIXED. If no point is active the status
is UNDEFINED.
9-14 CGS GmbH Hainburg, Germany 11/03/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com