ORIS PDF Tuner Version 4.4.8 User Manual - image2output - Support

http://www.image2output.com
Measuring Distances and Angles
Display and Measure Functions
Measuring Distances and Angles
You can measure distances and angles between two points anywhere
on a layout or image:
1. Click the tool.
2. Click on the layout or image to define the first point. You can also enter
the coordinate on the keyboard (direct input, see page 29-7).
3. The position of the cursor defines the second point. As you move the
cursor across the screen, the following values are displayed and updated
continuously in the status bar at the window bottom:
dX: horizontal distance
dY: vertical distance
L: direct distance
a: angle
The unit is millimeters on layouts and pixels on images. If the image
resolution is known, the distance L is also specified in millimeters.
4. You can now click on the image or layout again to redefine the first
point. The distances and angles are now measured between the new
point and the current cursor position.
ORIS PDF Tuner Version 4.4.8 User Manual 30-23
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com