Unified Development Ordinance - Currituck County Government

Chapter 3: Zoning DistrictsSECTION 3.4: RESIDENTIAL BASE ZONING DISTRICTSSubsection 3.4.5: Single-Family Residential-Isolated (SFI) DistrictD. TYPICAL BUILDING FORMSE. BUILDING CONFIGURATIONF. DIMENSIONAL STANDARDSMax. Gross Density (du/ac) N/A Min. Major Arterial Street Setback (ft) 50Max. FAR (%) 0.40 Min. Side Setback (ft) 155Min. Lot Area (sf ft) [1] 130,000 Min. Rear Setback (ft) 256Max. Lot Area (acres) N/A Min. Agricultural Setback (ft) [5] 50Min. Lot Width, Interior Lot (ft) 125 [2]1 Min. Accessory Use Setback (ft) [6] 10 7Min. Lot Width, Corner Lot (ft) 1352 Min. Driveway/Parking Setback (ft) 10 8Max. Lot Depth (ft) [3] Min. Fill Setback from all Lot Lines (ft) 109Max. Lot Coverage (%) 30 Min. Wetland/Riparian Buffer (ft) [5] 500Min. Front Setback (ft) [4] 203 Max. Building Height (ft) 35 -Min. Corner Side Setback (ft) 204 Min. Spacing Between Buildings (ft) 10 =[1] Lots platted prior to January 1, 2013 and family subdivision lotsshall be at least 40,000 square feet in area[2] All lots shall maintain a minimum street frontage of 35 feet[3] Lot depth shall not exceed four times the lot width[4] Front setbacks shall be measured from ultimate ROW line[5] Applied to major subdivisions platted after January 1, 2013 andsite plans on lots 10 acres in area and greater[6] Structures prohibited in front of principal building when principalbuilding is less than 300 feet from streetCURRITUCK COUNTY, NC UNIFIED DEVELOPMENT ORDINANCE3.19