Unified Development Ordinance - Currituck County Government

Chapter 3: Zoning DistrictsSECTION 3.5: BUSINESS AND MIXED-USE BASE ZONING DISTRICTSSubsection 3.5.3: Limited Business (LB) DistrictD. BUILDING CONFIGURATIONE. DIMENSIONAL STANDARDSMax. Gross Density (du/ac) N/A Min. Major Arterial Street Setback (ft) [3]Max. FAR (%) [2] 0.40 Within Full Service Areas (ft) 303Min. Lot Area (sf ft) 40,000 Outside Full Service Areas (ft) 1004Max. Lot Area (acres) N/A Min. Side Setback (ft) 156Min. Lot Width, Interior Lot (ft) 125 Min. Rear Setback (ft) 255Min. Lot Width, Corner Lot (ft) 1251Min. Agricultural Setback (ft) [4] 50Max. Lot Depth [1] Min. Accessory Use Setback (ft) [5] 10Max. Lot Coverage (%) 65 Min. Driveway/Parking Setback (ft) 108Min. Front Setback (ft) 202Min. Fill Setback from all Lot Lines 10Min. Corner Side Setback (ft) 20- Min. Wetland/Riparian Buffer (ft) [4] 50 9Max. Building Height (ft) 350Min. Spacing Between Buildings (ft) 107[1] Lot depth shall not exceed four times the lot width[2] Commercial structures exceeding 5,000 square feet must obtain use permit approval if proposed outside a full service area[3] Metal siding is prohibited on building facades facing major arterial streets[4] Applied to major subdivisions platted after January 1, 2013 and site plans on lots 10 acres in area and greater[5] Structures prohibited in front of principal building when principal building is less than 300 feet from streetCURRITUCK COUNTY, NC UNIFIED DEVELOPMENT ORDINANCE3.27