NetBackup 4.5 Troubleshooting Guide for Windows - Symantec

NetBackup Status Codes and Messages 4
This chapter lists all the status codes and messages provided by NetBackup. (Media
Manager Status Codes and Messages are provided in Chapter 5). There are two parts to
the chapter:
◆ The first section, Status Codes, lists the NetBackup status codes in numerical order
and includes an explanation of what occurred along with recommended actions.
◆ The second section, Messages, lists the same status codes but sorts them
alphabetically according to the message. Only the messages and status codes are
included in the second section.
If you see a status code without its associated message text, you can determine the
message, its explanation and recommended action by using the bperror command:
install_path\NetBackup\bin\admincmd\bperror -statuscode statuscode
[-recommendation]
where statuscode is the number of the message.
Example:
Status Codes
NetBackup 4.5 Troubleshooting Guide for Windows
install_path\NetBackup\bin\admincmd\bperror -statuscode 150
termination requested by administrator
The process is terminating (or has terminated) as a direct result of a
request from an authorized user or process.
Note The term media server, as distinct from master server or server, does not apply to the
NetBackup BusinesServer product. When troubleshooting a BusinesServer
installation, please ignore any references to media server.
NetBackup Status Code: 0
Message: the requested operation was successfully completed
NetBackup 4.5 Troubleshooting Guide for Windows
55